However, if you choose to paint your vehicle by yourself, you will have to be careful and go on with the process thoroughly since you do not want to make any flaw after having the final result. Some tips are very important to follow, so you will find any trouble later on. The tips come from an off-road enthusiast from California who had an experience in painting his car by himself. He did a decent rattle can paint job to his 80’s style Jeep back then. He wanted to have an easily spray over job and can be fixed easily once after going through an off-roading adventure in any kind of trails.
To avoid any eye shore view and crappy looking car, he did not want to do a rattle can paint by rattle can painting the color over the original color of the Jeep. He chose the best for his Jeep wisely and thoroughly. If you want to do the decent job of rattle can paint by your own, then you have to do the same. Choosing the right materials are important. First off, you have to make sure that you have a spray gun and cans of paint available at home. If you do not have any, go buy some because those materials are important.
Other materials you need for doing do it yourself painting are automotive primer or rust inhibitor primer or primer with similar types. Regular sandpaper is sufficient even though electric sander is highly recommended as another material for rattle can painting process. You also have to be ready with Bondo to cover tiny holes on your car, plastic tarps to cover anything you need to cover and use it on the floor to prevent any stain after finishing your job, 2 inches wide masking tape, thinner and acetone to clean up anything you need to clean up later on, and latex gloves.